CCNA2-Module 10

1 A computer programmer is developing software that requires a reliable stream of data. Which protocol can be used in the software design to eliminate the need for building error detection and recovery into the application program?

• TCP*
• IP
• ICMP
• UDP
• HTTP

2 Which of the following would an administrator do to defend against a denial of service SYN flooding attack? (Choose two.)

• Hide the source of incoming IP addresses.
• Decrease the connection timeout period.*
• Synchronize all host communication.
• Increase the connection queue size.*
• Flood the network with false SYN requests.

3 What is the purpose of Positive Acknowledgment and Retransmission (PAR)?

• PAR allows the presentation layer to request that data be resent in a format the destination host can process.
• PAR provides a mechanism for the receiving device to request that all segments be retransmitted if one segment is corrupt.
• PAR helps ensure that a number of data segments sent by one host are received by another host before additional data segments are sent.*
• PAR is used to renegotiate the window size during the synchronization process.

4 Which of the following describe types of port numbers that can be represented in the header of TCP and UDP segments? (Choose two.)

• connectionless
• well-known*
• operational
• dynamic*
• static

5 Why is TCP considered a connection-oriented protocol?

• It establishes a virtual connection between hosts using a two-way handshake.
• It uses IP to guarantee delivery of packets between hosts.
• It requires hosts to go through a synchronization process prior to data transmission.*
• It creates a connection that depends on application layer protocols for error detection.

6 What is the purpose of using port numbers in the transport layer?

• to identify the segment as being either TCP or UDP
• to provide reliability during data transport
• to identify the interface port number used by the router when forwarding data
• to track multiple conversations that occur between hosts*

7 What does TCP use to ensure reliable delivery of data segments?

• upper layer protocols
• lower layer protocols
• sequence numbers*
• port numbers

8 Which authority has control over the assignment of port numbers for applications?

• IEEE
• IANA*
• InterNIC
• Software Developers Association

9 Which of the following describes how TCP adds reliability to communication? (Choose two.)

• Hosts using TCP set up virtual circuits at the beginning of the transmission using the three-way handshake.*
• Hosts using TCP set the error-checking frequency at the beginning of the transmission and maintain this frequency for the duration.
• The receiving host acknowledges that it has received the expected number of segments and requests additional data.*
• The receiving host acknowledges any incorrectly received data and requests retransmission of damaged or missing bytes.

10 Which address is dynamically assigned by the source host when forwarding data?

• destination IP address
• destination port number
• default gateway address
• source IP address
• source port number*

11 Which of the following are functions of the TCP protocol? (Choose three.)

• translation of data
• synchronization*
• path determination
• flow control*
• data representation
• reliability*

12 Which transport layer unit of information places the port number in the header?

• data
• segment*
• packet
• frame
• bit

13 What is the purpose of the three-way handshake that occurs between hosts using TCP as the transport layer protocol?

• to determine the number of packets that can be sent before an acknowledgment is required
• to allow a host to forward data to a router
• to establish a round trip connection between sender and receiver before data is transferred*
• to provide a mechanism for data encryption and compression

14 At which point in the transmission process are segments numbered?

• when received
• when reassembling
• before transmission*
• while negotiating window size

15 What type of segment and data is shown in the graphic?

• a UDP segment carrying e-mail traffic
• a TCP segment carrying FTP traffic
• an IP segment carrying FTP traffic
• a UDP segment carrying web traffic
• a TCP segment carrying web traffic*
• an IP segment carrying e-mail traffic

16 When a host receives a data segment, what allows the host to determine which application should receive the segment?

• IP source address
• IP destination address
• PAR
• sliding window
• port number*
• SYN packet

17 Which statement is true regarding the TCP protocol?

• Flow control at the transport layer is provided by adding a sequence number to each segment.
• A sliding window allows for communicating devices to negotiate the amount of unacknowledged data that can be sent.*
• A window size of 1 would require a receiving device to send ACK 1 after the Segment 1 has been received.
• TCP is used by sending hosts to segment large data files prior to transmission while IP is used by receiving host to reassemble the smaller segments.

18 What is used by both TCP and UDP when creating a segment?

• IP address
• MAC address
• IPX address
• socket or port number*
• acknowledgment number
• sequence number

19 What is used by UDP to determine if the data or header has been transferred without corruption?

• lower layer protocols
• checksum*
• PAR
• sliding window
• acknowledgment and retransmission
• IP

20 How are originating source port numbers assigned during the data encapsulation process?

• assigned manually by the user when starting the application
• assigned dynamically by the source host*
• assigned by the routing protocol during the lookup process
• assigned by the destination host during session negotiation

21 Which of the following protocols uses UDP for transport layer services?

• SMTP
• HTTP
• DNS*
• FTP

22 Which of the following determines the amount of data that can be sent without an acknowledgment when sending a TCP segment?

• segment number
• priority number
• window size*
• value in the length field
• value in the port field
• acknowledgment number

23 During the encapsulation process, in which order are the IP address, MAC address, and port number assigned when the router is establishing communication with the TFTP server?

• IP address, MAC address, port number
• MAC address, IP address, port number
• port number, IP address, MAC address*
• port number, MAC address, IP address

24 Which of the following describes a type of denial of service attack designed to exploit the normal function of the TCP three-way handshake?
A host sends a packet with a spoofed source IP address.*
A host sends a packet with an incorrect destination IP address.
A source sends a packet containing a garbled header.
A host sends an oversized packet that fills the memory buffers of the destination host.
A host sends a packet that contains a virus.
A host sends a packet that contains a worm.